Drawing Water Away From Your Driveway To Prevent Damage

20 October 2014
 Categories: Construction & Contractors, Articles


If you hire a contractor from a site like http://www.lakeridgepaving.com to install an asphalt driveway on your property, then you want to do everything in your power to keep your driveway in good condition. Unfortunately, you may see puddles or standing water forming across the driveway surface after a rain storm. This water will evaporate within a day or two, but the water may work its way underneath your driveway. When this happens, potholes and cracks can start to form. You can stop this from happening by drawing the water away from the asphalt, and a few good examples are outlined below.

Level Out Your Driveway

If you use your driveway a great deal, then certain areas of the asphalt may start to wear away. When this happens, an indentation may form within the asphalt where water can settle. You will generally see one puddle in an isolated area of your driveway when this occurs. One of the best ways to fix this issue is to place asphalt materials within the indentation. Before you start you fix, go to your local home repair store and purchase cold mix asphalt and liquid asphalt. You will need a trowel as well and a long board for tamping.

Repair Indentations

Before you make any repairs, make sure that the area is clean and free of debris. Use a broom to release loose materials and use soap and water to clear away any oil or grease from the space. Wipe away water with a clean towel afterwards. When the area is ready, apply a thin coat of your asphalt liquid across the inside of the indentation. This will help the asphalt to stick in place better.  

Use a trowel to scoop the cold mix asphalt out of your container and completely fill the indentation. Make sure the material sits about one-half to one-inch above the edge of your driveway. Use your tamping tool to compress and flatten the asphalt until it is level with the surface of your driveway. Allow the asphalt to cure for one or two days before driving over the repair.

Clean and Extend Gutters

Clearing Gutters

If the lawn around your driveway typically becomes drenched with water after a rain storm, then you may have a drainage issue. This issue may be caused by the expulsion of water from your gutter. If your gutters have not been cleaned in some time, then water may be escaping out the sides of the channels, and this can cause water to accumulate near your driveway.  

You can stop this from happening by cleaning your gutter. Use a ladder to reach your gutters and use your hands to remove loose leaves, sticks, and other debris. If your gutters appear dirty, then rinse them thoroughly with your garden hose.

Lengthen Downspouts

If the downspout attached to your gutter releases water near your driveway, then this can cause water to gather on the asphalt as the soil becomes saturated with water. Your gutters should not force water to drain near your house though, and this may mean that your downspout is too short. Thankfully, you can easily extend the downspout. When you do this, make sure that the spout reaches the edge of your property so that soil can stay relatively dry around your home and driveway.

You can extend downspouts in a variety of ways, but the most secure extension involves the placement of a long, solid, and straight piece of aluminum gutter material. Go to your local home store and purchase a gutter piece like the one that attaches to your downspout. This piece is called the downpipe, and you should locate one that is the same diameter as the one attached to your house.  

Downpipes and other gutter pieces are generally secured with rivets or small nails, but you can secure the new downpipe with silicone caulk. Once you purchase the pipe and your caulk, slip the pipe into the end of your downspout to make sure it fits. Remove the pipe and run a thin line of caulk inside the edge of the spout. Secure the new downpipe in place. The downpipe will extend out from your home, but you do not want it to sit on your grass, because the end will become clogged. Set a large rock underneath the downpipe extension piece to raise it up slightly.

If you have recently had an asphalt driveway installed on your property, then you need to make sure that water does not ruin it. You can channel water away from your driveway by repairing indentations and by extending gutter downspouts.